Are you looking for the best plumbing company in Snoqualmie, WA?

Name: Plumbing Installation, Plumbing Services, Faucets Fixing, Drain Cleaning, Toilet Repairs, Water Pipe Leaks, Water Heater, Tankless Water Heaters, Water Heater Repairs
Brand: Bellevue Plumber, Sewer, Septic, Electric, & HVAC
Rating: 5 (68 reviews)

At Bellevue Plumber, Sewer, Septic, Electric, & HVAC, we are here to serve you!

Call Now

No matter how careful its owners, there are always plumbing problems in every home, be it bad plumbing or a water heater that doesn’t work. And these can be a real headache if they are not taken care of in time. In fact, 54% of the most expensive damages to homes are due to plumbing problems.

For example, a leaky pipe can turn into a considerable leak that completely damages the plumbing system in your home or a water heater that doesn’t work as it should explode and cause irreparable damage to the structure of your house.

The costs for these types of extensive plumbing repairs can cost tens of thousands of dollars and wipe out your family budget in no time. Luckily for all our friends from Snoqualmie, WA, we are a top-ranked plumbing company, and our local plumbers are ready to help you! The best thing you can do to avoid this is to contact professionals to make the necessary repairs.

These are the most common plumbing problems.

These problems can pose a severe threat to your home’s plumbing system, whether due to ageing fixtures or wear and tear on plumbing equipment. Luckily for you, at Bellevue Plumber, Sewer, Septic, Electric, & HVAC, we can provide you with our expertise and advice so that these plumbing problems are no longer a headache.

Let’s take a look at some of the most common plumbing problems:

Dripping Faucets:

Dripping faucets are not only a nuisance; they also wastewater and can cause rust on pipes or severe damage to wood and metal surfaces. These are almost always caused by a worn-out washer or a poor faucet installation.

Leaky Pipes:

Leaky pipes can be caused by stubborn blockages, internal or external pipe corrosion, or even the effect of excessive water pressure. This is one of the most severe plumbing problems, as it can severely damage your home’s plumbing system.

Water Heater Malfunction:

When the water heater is not working correctly, you could be struggling with faults in the heater’s electrical circuits, corrosion or sediment build-up in the heater circuits, and even a poor installation of the water heater.

Frequently Asked Question

How often do I have to check the water pipes?

Why is dirty water coming out of the tap?

The specific causes for which it occurs are related to the intervention of polluting substances in the water network. Sediment such as sand, gravel, or mud has most likely made its way into the plumbing system. However, it is also possible that it is due to contamination by zinc, lead, brass, nickel, copper or iron.

Similarly, although much less frequently, the cause of dirty water coming out of the tap can be due to contamination by cement or concrete.

Why is my toilet not flushing well?

The first thing to rule out is if your toilet is clogged. To check, fill a bucket with water and flush it down the toilet. See if the water is draining slowly. If this is the case, the cause is a blockage in the drain.

A blocked vent will prevent air from venting out of the pipe, resulting in a vacuum in the drain pipe causing the toilet not to flush as hard as it should.

Go up to the roof and check that the ventilation tube is not obstructed. If so, use a plumber's snake to remove the clog and allow your toilet to breathe properly.

Let us show you what the best plumbing company has to offer! Give us a call today!

(425) 386-4481

GET IN TOUCH

Are you replacing your homes water heater in King County, WA?

Give the experts at Bellevue Plumber, Sewer, Septic, Electric, & HVAC a call any day of the week!

Call Us

(425) 386-4481

Email Us

[email protected]

Google Map directions